Andrey, > I also noticed that while the camera is not triggering (during the boot > sequence) the LED attached to J15 connector of the master camera is always > on. As soon as the sensor is configured the led start to blink from > trigger. > > That is wrong, it should be off. Will need to check - why is it so. Is > it on all cameras? >
I will test tomorrow. But I only connected PIN 1 and 4 to the LED, I did not connected 1 to 3 and 2 to 4. May it be the reason ? Alexandre
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
