Andrey, I tried on multiple cameras. In free running mode and in triggered slave mode the camera _always_ power pins 1 and 4 on the J15 connector. Only as soon as you use TRIG_OUT, the pins are off and the LED only blink on trigger.
Best regards, Alexandre On Thu, Jul 1, 2010 at 11:54 PM, Andrey Filippov <[email protected]> wrote: > I will test tomorrow. But I only connected PIN 1 and 4 to the LED, I did >> not connected 1 to 3 and 2 to 4. May it be the reason ? >> > > No, that should not be a problem > > Andrey > >
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
