Hi Sebastian, The camera is booting up. The led light of the ethernet connector comes up as yellow... The camera does not havea rs232..it has an usb connector.
I changed my eth0 connection to be static ip to bring it on the same subnet as the camera ip 192.168.0.9 vine...@vineeth-laptop:/etc/init.d$ cat /etc/network/interfaces auto lo iface lo inet loopback #auto eth0 #iface eth0 inet dhcp auto eth0 iface eth0 inet static address 192.168.0.7 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 But i guess this is incorrect.... Let me know your thoughts... Vineeth On Sun, Jul 11, 2010 at 2:13 AM, Sebastian Pichelhofer < [email protected]> wrote: > Hi Vineeth > > Since you are now an "official Elphel customer" you can also use the > official mailing list. > > http://www3.elphel.com/list > > The camera should boot as soon as it has power. > Does any led of the Ethernet connector light up when you connect power? > Does your camera have the additional connectors on the side (rs323)? > > Regards Sebastian > > On Sat, Jul 10, 2010 at 4:10 PM, <[email protected]> wrote: > > hi > > i got the cable for the poe. > > was trying to hook up and get the camera on the network but its not > coming > > up > > do we have to turn anything on the camera for the network to become > active? > > the green light on the poe is glowing while powering it up. > > i tried to connect to the camera with this 192.168.0.9 ip address using > > firefox but its timing out. Even tried pinging on this address but its > not > > replying back. > > I am using this link for the details.... > > > > > http://www3.elphel.com/importwiki?title=Elphel_353_series_quick_start_guide > > > > -- > > Cheers > > Vineeth > > > -- Cheers Vineeth
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
