After flashing a compiled image neither astreamer nor httpd were running. So I tried flashing from the DVD to recover to a precompiled image (8.0.8.25 or 41). Forgetting to apply the update this failed and I desperately tried to force the camera into network boot mode. Finally I ran flash_eraseall on each flash partition (blame me) and tried again. Only when I remembered to apply the update, the camera loaded the intermediate boot image, but didn't flash the final image.
Using method II described in README.flash we wrote a short driver script to netboot, see attachment 'netboot-full'. We first tried to give netboot the parameter '-cmd all' and after that didn't work, guessed '-cmd flashitall'. The flashing process seemed to work, but after turning power on and off, there were again no serial messages and no ping. >From that last attempt see the attached files 'netboot-full-output.txt' with the output from etraxfsboot and 'camera-output.txt' with the output from the serial line during the reflashing process as well as the logs written to the nfs directory in 'logs.tgz'.
netboot-full.dat
Description: Binary data
netboot-full-output.txt
Description: Binary data
camera-output.txt
Description: Binary data
logs.tgz
Description: Binary data
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
