Latest information regarding our reboot problem:
We installed the prod353-station and did the manual netboot. The result was similar as before. When asking for reboot, the camera was pingable (at 192.168.0.200) and nmap showed the ftp port to be open. But after reinserting the network cable, there was no ping, no serial output, and no serial echo. Then we tried again checking 'clean cameras', which didn't work either. The reflash logs state the first block to be erased and written to start at 0x40000, which might mean that the boot block was skipped. We tried a third time, again checking 'manual netboot' with the same negative result. Attached are all files with the logs from /tmp/prod353.
tmp-prod353.tgz
Description: Binary data
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
