Hi, 1. In a ssh/telnet session or http://192.168.0.9/phpshell.php. If you type "top" to see a list of processes, will it show anything like:
835 1 root S 44896 108% 0% /usr/local/bin/str > 2. Also could you please send the output of the terminal command "mplayer rtsp://192.168.0.9:554 -vo x11 -zoom" ? Best regards, Oleg 2011/7/10 李伟 <[email protected]> > ** > Hi, > > Thanks for reply. I have already tried the links, but the problems are > still there.I reduced the resolution below 800*600, and try to see the video > with the camvc, MPlayer and VLC. But all of them did not work. > > I find that in the program setting option of the camvc, the stream Ip is > blank. Could this be the reason? When I try to config the Stream ip in the > "Streamer contols", there is a dialog box said that "These controls are not > yet supported in the 8.0 software". My Sourcecode version is > elphel353-8.0.8.41. > > It seems the video streamer did not automatically start at boot time in the > camera, how can I fix it? > > Thanks for your help. > > Wei Li > > > ------------------------------ > *发件人：* Sebastian Pichelhofer > *发送时间：* 2011-07-08 04:23:07 > *收件人：* 李伟 > *抄送：* support-list > *主题：* Re: [Elphel-support] question about Video streamer control > Hi Wei > > The video streamer is automatically started at boot time in the camera. > > Since most video players have trouble with 5 Megapixel video streams you > should reduce the resolution in camvc by changing the WOI > > If you want to view the live stream take a look at: > http://wiki.elphel.com/index.php?title=Elphel_353_series_quick_start_guide#2._watch:_player_GUI_.2F_command_line > > or record the video stream: > > http://wiki.elphel.com/index.php?title=Elphel_353_series_quick_start_guide#3._record:_command_line > > Regards Sebastian > > 2011/7/7 李伟 <[email protected]> > >> Hi, >> I am a new beginner of Elphel NC353L. When I try to config the video >> streamer with camvc, there is a dialog box said that "These controls are not >> yet supported in the 8.0 software". My Sourcecode version is >> elphel353-8.0.8.41. >> How can I see and save the video output of the camera into my laptop? >> There is another question: how can I do to sync the GPS time from a GPS >> reciever with the video output of Elphel NC353L. >> Wei >> >> >> >> _______________________________________________ >> Support-list mailing list >> [email protected] >> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >> >> > > _______________________________________________ > Support-list mailing list > [email protected] > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > >
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
