I think that the streamer tab should be removed. "These controls are not yet supported in the 8.0 software" is pretty confusing.
Regards, Polto ----- Mail original ----- De: "Oleg" <[email protected]> À: "李伟" <[email protected]> Cc: [email protected] Envoyé: Mardi 12 Juillet 2011 02:21:51 Objet: Re: [Elphel-support] question about Video streamer control Hi, 1. In a ssh/telnet session or http://192.168.0.9/phpshell.php . If you type "top" to see a list of processes, will it show anything like: 835 1 root S 44896 108% 0% /usr/local/bin/str 2. Also could you please send the output of the terminal command "mplayer rtsp:// 192.168.0.9:554 -vo x11 -zoom" ? Best regards, Oleg 2011/7/10 李伟 < [email protected] > <blockquote> Hi, Thanks for reply. I have already tried the links, but the problems are still there.I reduced the resolution below 800*600, and try to see the video with the camvc, MPlayer and VLC. But all of them did not work. I find that in the program setting option of the camvc, the stream Ip is blank. Could this be the reason? When I try to config the Stream ip in the "Streamer contols", there is a dialog box said that "These controls are not yet supported in the 8.0 software". My Sourcecode version is elphel353-8.0.8.41. It seems the video streamer did not automatically start at boot time in the camera, how can I fix it? Thanks for your help. Wei Li 发件人： Sebastian Pichelhofer 发送时间： 2011-07-08 04:23:07 收件人： 李伟 抄送： support-list 主题： Re: [Elphel-support] question about Video streamer control Hi Wei The video streamer is automatically started at boot time in the camera. Since most video players have trouble with 5 Megapixel video streams you should reduce the resolution in camvc by changing the WOI If you want to view the live stream take a look at: http://wiki.elphel.com/index.php?title=Elphel_353_series_quick_start_guide#2._watch:_player_GUI_.2F_command_line or record the video stream: http://wiki.elphel.com/index.php?title=Elphel_353_series_quick_start_guide#3._record:_command_line Regards Sebastian 2011/7/7 李伟 < [email protected] > <blockquote> Hi, I am a new beginner of Elphel NC353L. When I try to config the video streamer with camvc, there is a dialog box said that "These controls are not yet supported in the 8.0 software". My Sourcecode version is elphel353-8.0.8.41. How can I see and save the video output of the camera into my laptop? There is another question: how can I do to sync the GPS time from a GPS reciever with the video output of Elphel NC353L. Wei _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com </blockquote> _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com </blockquote> _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
