Carlos, Could you please send the output of: 1. "fdisk -l" 2. "hdparm -I /dev/hda" 3. "dmesg"
Could you recall what happened before camogm stopped recognizing the hdd ? Regards, Oleg On 2 February 2012 16:36, Carlos Padial <[email protected]> wrote: > ok, i follow the wiki again and post you what happens > > Command (m for help): p > > Disk /dev/hda: 120.0 GB, 120034123776 bytes > 255 heads, 63 sectors/track, 1824 cylinders, total 29305206 sectors > Units = sectors of 1 * 4096 = 4096 bytes > > Device Boot Start End 1K-Blocks Id System > > Command (m for help): n > Command action > e extended > p primary partition (1-4) > p > Partition number (1-4): 1 > First sector (1-29305205, default 1): Using default value 1 > Last sector or +size or +sizeM or +sizeK (1-29305205, default > 29305205): Using default value 29305205 > > Command (m for help): p > > Disk /dev/hda: 120.0 GB, 120034123776 bytes > 255 heads, 63 sectors/track, 1824 cylinders, total 29305206 sectors > Units = sectors of 1 * 4096 = 4096 bytes > > Device Boot Start End 1K-Blocks Id System > /dev/hda1 1 29305205 117220820 83 Linux > > Command (m for help): w > The partition table has been altered! > > Calling ioctl() to re-read partition table > [root@Elphel353 /]1089# mkfs.ext2 /dev/hda1 -m0 -T largefile4 > mke2fs 1.38 (30-Jun-2005) > mkfs.ext2: Could not determine if /dev/hda1 is mounted > > Could not determine filesystem size > > ? > > and if i do cat /proc/partitions again hda1 isn't there > > _______________________________________________ > Support-list mailing list > [email protected] > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
