hi oleg now i have removed again the internal hdd and want to try the external sata.
i have an external hdd with two partitions: dev/sdc1 344gb ext4 dev/sdc2 121gb ext2 i want to use the second one, i formatted it not to big (120gb, as the internal). I formatted the ext2 in my computer, not in camera... i get this in the boot log: ---------------------------- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide: ETRAX FS built-in ATA DMA controller cris_ide_init() hda: ST3500630AS, ATA DISK drive ide0 at 0x10000000-0x10000007,0x2c000000 on irq 65 hda: max request size: 128KiB hda: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63, (U)DMA hda: cache flushes supported hda: hda1 Initializing USB Mass Storage driver... ------------------------------ and in the camera from telnet: [root@Elphel353 /]829# fdisk -l Disk /dev/hda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End 1K-Blocks Id System /dev/hda1 1 60802 488386583+ ee EFI GPT [root@Elphel353 /]829# cat /proc/partitions major minor #blocks name 3 0 488386584 hda 3 1 488386583 hda1 31 0 131072 mtdblock0 31 1 256 mtdblock1 31 2 7936 mtdblock2 31 3 24576 mtdblock3 31 4 81920 mtdblock4 31 5 12288 mtdblock5 ------------------------------ in camogmgui i see the partition detected but cant mount it. dont know if it is detecting the right partition. It's right to use an hdd with more than one partition? thanks again. -- Carlos Padial surreal.asturnazari.es
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
