yes, this seems to be said in fdisk | /dev/hda1 1 60802 488386583+ ee EFI GPT
but i dont know about this. What kind of partition is expected to work? some guidance will be helpful. best regards. 2012/3/20 Alexandre Poltorak <[email protected]> > Hi Carlos, > > It may be that you have partitioned it as GPT partitions. > > Best regards, > Alexander > ------------------------------ > > *De: *"Carlos Padial" <[email protected]> > *À: *"Oleg" <[email protected]> > *Envoyé: *Mardi 20 Mars 2012 15:40:39 > *Objet: *[Elphel-support] external hdd > > > hi oleg > > now i have removed again the internal hdd and want to try the external > sata. > > i have an external hdd with two partitions: > dev/sdc1 344gb ext4 > dev/sdc2 121gb ext2 > > i want to use the second one, i formatted it not to big (120gb, as the > internal). I formatted the ext2 in my computer, not in camera... > > i get this in the boot log: > ---------------------------- > > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > > ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx > > ide: ETRAX FS built-in ATA DMA controller > > cris_ide_init() > > hda: ST3500630AS, ATA DISK drive > > ide0 at 0x10000000-0x10000007,0x2c000000 on irq 65 > > hda: max request size: 128KiB > > hda: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63, > (U)DMA > > hda: cache flushes supported > > hda: hda1 > > Initializing USB Mass Storage driver... > ------------------------------ > > and in the camera from telnet: > > [root@Elphel353 /]829# fdisk -l > > Disk /dev/hda: 500.1 GB, 500107862016 bytes > 255 heads, 63 sectors/track, 60801 cylinders > Units = cylinders of 16065 * 512 = 8225280 bytes > > Device Boot Start End 1K-Blocks Id System > /dev/hda1 1 60802 488386583+ ee EFI GPT > [root@Elphel353 /]829# cat /proc/partitions > major minor #blocks name > > 3 0 488386584 hda > 3 1 488386583 hda1 > 31 0 131072 mtdblock0 > 31 1 256 mtdblock1 > 31 2 7936 mtdblock2 > 31 3 24576 mtdblock3 > 31 4 81920 mtdblock4 > 31 5 12288 mtdblock5 > > ------------------------------ > in camogmgui i see the partition detected but cant mount it. > > dont know if it is detecting the right partition. It's right to use an hdd > with more than one partition? > > thanks again. > > -- > Carlos Padial > surreal.asturnazari.es > > _______________________________________________ > Support-list mailing list > [email protected] > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > > > -- Carlos Padial surreal.asturnazari.es
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
