Also you can install kdevelop3.5 from the project Trinity: http://www.trinitydesktop.org/ There is some difficults: 1. Precise repository is not ready, so use instructions for Oneiric. 2. It is necessary to install libqt3-mt from this repository, then install kdevelop-trinity. 3. kdevelop will be installed not in PATH, so launch it by full path: /opt/trinity/bin/kdevelop.
2012/6/17 Oleg <[email protected]>: > Adam, > > 1. You can try to get our kubuntu 12.04 live dvd image > from here (kubuntu-elphel-4.iso). It has all the needed packages installed, > except for Xilinx ISE WebPack. > > 2. To examine the fpga project you just need ISE WebPack (10.1sp3). You > could try newer versions of webpack - create a new project and add files > that you got from our CVS repository. > > Best regards, > Oleg Dzhimiev > Electronics Engineer > phone: +1 801 783 5555 x124 > Elphel, Inc. > > On 17 June 2012 00:16, Adam Gibson <[email protected]> wrote: >> >> Hi, >> >> >> >> I’m trying to get the Elphel Software setup so I can examine the FPGA >> project. >> >> I’m running Ubuntu 12.04 on a VMWare Virtual and I’m unable to install >> KDevelop 3.5, (I can Kdevelop 4). >> >> In all my wiki reading I noticed that it says that Elphel isn’t compatible >> with KDevelop 4. >> >> >> >> I’m a Windows person dipping my toe into linux waters so please forgive me >> and understand I may need more explicit help. >> >> >> >> When following the Elphel instructions to the letter for Ubuntu 11.04 >> (which are just the 9.1 instructions); since it is the latest Ubuntu >> mentioned in the wiki. >> >> I’ve been digging on the KDevelop site trying to find old installers but I >> have come up with nothing. Is anyone able to help me please? Thanks in >> advance to all. >> >> >> >> Below is the console print when I enter the command that fails. >> >> >> >> >> >> adam@ubuntu:~$ sudo apt-get install kdevelop-kde3 kdevelop-kde3-doc >> >> [sudo] password for adam: >> >> Reading package lists... Done >> >> Building dependency tree >> >> Reading state information... Done >> >> Some packages could not be installed. This may mean that you have >> >> requested an impossible situation or if you are using the unstable >> >> distribution that some required packages have not yet been created >> >> or been moved out of Incoming. >> >> The following information may help to resolve the situation: >> >> >> >> The following packages have unmet dependencies: >> >> kdevelop-kde3 : Depends: kdelibs4c2a-kde3 (>= 4:3.5.8-1) but it is not >> going to be installed >> >> Depends: libcvsservice0-kde3 (>= 4:3.5.8-1) but it is not >> going to be installed >> >> Depends: libdb4.7 but it is not installable >> >> Depends: kdebase-kde3-bin but it is not going to be >> installed >> >> Recommends: libtool >> >> E: Unable to correct problems, you have held broken packages. >> >> >> _______________________________________________ >> Support-list mailing list >> [email protected] >> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >> > > _______________________________________________ > Support-list mailing list > [email protected] > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
