Hello > Of course it only works if the camera is in triggered mode. > http://wiki.elphel.com/index.php?title=Trigger
Some questions are raising while reading the documentation pages. http://wiki.elphel.com/index.php?title=Synchronizing_353 I have plugged a 4P4C connector with a 4-wires cable to J15. Is this connector GPIO[11] ? I have chosen to use PIN 2 on that connector. I am using between the J15 connector and the external flash a LD117 with an adjustable output voltage (using a potentiometer). I must be cautious because I can damage my flash in case of incorrect voltage... Should my Elphel settings be the following ones ? TRIG = 4 TRIG_CONDITION = 0 TRIG_OUT = 0x400000 (I'm using bit 22) TRIG_PERIOD = 1 TRIG_BITLENGTH = 31 EXTERN_TIMESTAMP = 0 XMIT_TIMESTAMP = 0 Thanks in advance for your help. I am not sure of TRIG_OUT value. Regards. Éric Boudrand _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
