Hi Oleg > You might have seen the schematics - > http://wiki.elphel.com/images/9/9a/10369a.pdf > I haven't seen it. Thanks.
> So, you get 5V only on the PIN 4 of J15. TRIG_OUT=0x800000. Ok. I'am using this now. I have resolder the cable and I got 5V on the output despite the fact I made a mistake in the configuration. I set 0x800000 in decimal value of TRIG_OUT. > PINs 2 & 3 need an external power source. They are galvanically > decoupled with the camera's circuitry. GPIO[10] controls a diod. > So if you would like to use PIN2 you should connect: V+=>PIN3, > PIN2=>FLASH=>GND. > > TRIG_OUT should be 0x200000. Each GPIO has 2 bits in this register. > You probably saw this page as well - > http://wiki.elphel.com/index.php?title=Trigger > I have read this page. But, it is not clear. I do not understand how TRIG_OUT is computed. I will use the values from the page. Concerning TRIG_PERIOD, if I set 0x500, does this value means 1280 sec ? Regards. Éric Boudrand _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
