Le 5 sept. 2013 à 23:44, support-list <support-list@support.elphel.com> a écrit :
> Daniel > > For FPS control I meant using TRIG=4 as described in > http://wiki.elphel.com/index.php?title=Trigger > TRIG_CONDITION=0 means that the FPGA timer will generate trigger pulses, not > the external connector OK, this is the basic situation at start. Now, you recommend to test in single frame mode "The frame rate can be reduced by going to the external (from the sensor point of view) trigger mode and acquire single frames." I did that by setting the TRIG_PERIOD to 1, but how do I retrieve the image ? When I just change TRIG_PERIOD in the parameter editor, Firefox is always waiting for a page that does not arrive, and when I do it by http://192.168.0.9:8081/trig/pointers as mentioned in http://wiki.elphel.com/index.php?title=Trigger#Single_frame_triggering_from_PC There is a reply (with changing values at each try) but I do not know how to check the image. I guess it is in the circular buffer. > > Did you try to change height after reducing width (and getting bad images)? > > Do both sensors work correctly with reduced WOI if only one is used, not both? I still have to do that but I'm not at work now. A last point : the actual length of the new cable is 30 cm not 20 as I wrote. I guess it's not helping … Daniel _______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
