Andrey, Le 7 sept. 2013 à 20:37, support-list <support-list@support.elphel.com> a écrit :
> Imgsrv has "/trig" command that issues a single trigger if the camera is set > to single trigger mode, but for testing of the corrupted images it may be > simpler to just use some definitely slow fps (like 1 FPS) by setting > TRIG_PERIOD to 90000000 (it is measured in pixel clock periods, and the > default clock is 90 MHz). When you use a single trigger mode you may need > several frames triggers to propagate all the parameter changes through the > image acquisition pipeline (sensor+fpga) > OK. This is what I did. The result is the same: images scrambled with TRIG_PERIOD = 90000000 > 300 cable mm should be OK to adjust the phase Good news. Now I did what you previously suggested: > Did you try to change height after reducing width (and getting bad images)? Yes : same problem > Do both sensors work correctly with reduced WOI if only one is used, not both? What I did is just setting MULTI_MODE = 0 but I kept the other identical (especially TRIG = 4), correct ? The result is unfortunately also a corrupted image (see pdf here: https://upload.obspm.fr/get?k=1UAi3j9quiVKUdS0BWk ). Daniel
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
