Hi, I have trying to build the firmware and flash the camera however I have not been successful. I build the firmware on my machine and the used the web interface to upload the new firmware to the camera, however this bricked the camera. Do you have any advice about why this may have happened?
I then used the latest firmware release which I downloaded and wrote to SD card. I was able to boot from SD card and then upload the same downloaded firmware to the camera via the web interface. I was then able to boot off the NAND again so he camera was no longer bricked :) I then tried to add extra files onto the SD card, however the camera would not boot from SD card after adding extra files. Is it not possible to add files to filesystem on the SD card. I would like to be able to flash the camera with custom firmware with additional services running on the camera. Will this be easy to do? Thank you in advance for your support. Kind regards, *Richard Rigby* Software Developer www.redzone.com Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
