I have run '/usr/html/autocampars.php --init', looks like a very similar error trace to loading http://10.23.33.9/index.php?site=autocampars.php. Output posted at bottom of GDoc: https://docs.google.com/document/d/1WfGlWGk0A7zLgAl1EptMntTKoKLJLodron0P0zYcpB4/edit?usp=sharing
Linden Mills-Connery Zone4 Team <https://zone4.ca/contact/> 205-820 Main Street Canmore, AB, T1W2B7 403-401-7215 On 17 August 2018 at 17:53, Oleg <support-list@support.elphel.com> wrote: > I deleted /etc/autocampars.xml and went to http://10.23.33.9/index. >> php?site=autocampars.php again to re-generate it which just resulted in >> an error message. The error message is also in the GDoc. >> > That worked with the board I'm testing. > > What if you reboot? > Try from command line? > > [root@Elphel353 /root]759# */usr/html/autocampars.php --init* >> autocampars.php created a new configuration file /etc/autocampars.xml >> from defaults. >> Current frame=1266, sleeping to give daemons a chance >> Current frame=1319, waking up, daemons should be dead already >> before reset - current frame=0 >> after reset - current frame=2 >> setting COMPRESSOR_RUN=2 >> setting DAEMON_EN=Array >> ( >> [DAEMON_EN_AUTOEXPOSURE] => 1 >> [DAEMON_EN_STREAMER] => 1 >> [DAEMON_EN_CCAMFTP] => 0 >> [DAEMON_EN_CAMOGM] => 0 >> [DAEMON_EN_TEMPERATURE] => 0 >> [DAEMON_EN] => 3 >> ) >> after setParsFromPage - current frame=12 >> Sensor was successfully initialized at August 17, 2018, 11:49 pm from >> /etc/autocampars.xml page 0 > > > Regards, > Oleg > >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com