Thanks for the tip, solved it: I recall the autocampars.php file was causing issues on this camera before and I probably tried to fix it by pasting in the file from source into the web based terminal (http://10.23.33.9/index.php?site=phpshell.php). This converts all the HTML entities (&npsp; etc...) to the wrong thing. I SCPed in the original source, deleted /etc/autocampars.xml and ran /usr/html/autocampars.php --init. Working again.
I am still going to ship you the 000E64081CA1 mainboard (the one that won't boot). Thanks, Linden Mills-Connery Zone4 Team <https://zone4.ca/contact/> 205-820 Main Street Canmore, AB, T1W2B7 403-401-7215 On 20 August 2018 at 10:43, Oleg <support-list@support.elphel.com> wrote: > Linden, > > Does the file look ok? It should have ~4k lines. > http://192.168.0.9/index.php?site=admin-bin/editcgi.cgi? > file=/usr/html/autocampars.php > > Regards, > Oleg > > On Fri, Aug 17, 2018 at 6:57 PM Linden @ Zone4 <lin...@zone4.ca> wrote: > >> I have run '/usr/html/autocampars.php --init', looks like a very similar >> error trace to loading http://10.23.33.9/index.php?site=autocampars.php. >> Output posted at bottom of GDoc: >> https://docs.google.com/document/d/1WfGlWGk0A7zLgAl1EptMntTKoKLJL >> odron0P0zYcpB4/edit?usp=sharing >> >> Linden Mills-Connery >> Zone4 Team <https://zone4.ca/contact/> >> 205-820 Main Street >> <https://maps.google.com/?q=205-820+Main+Street+Canmore,+AB,+T1W2B7&entry=gmail&source=g> >> Canmore, AB, T1W2B7 >> <https://maps.google.com/?q=205-820+Main+Street+Canmore,+AB,+T1W2B7&entry=gmail&source=g> >> 403-401-7215 >> >> On 17 August 2018 at 17:53, Oleg <support-list@support.elphel.com> wrote: >> >>> I deleted /etc/autocampars.xml and went to http://10.23.33.9/index. >>>> php?site=autocampars.php again to re-generate it which just resulted >>>> in an error message. The error message is also in the GDoc. >>>> >>> That worked with the board I'm testing. >>> >>> What if you reboot? >>> Try from command line? >>> >>> [root@Elphel353 /root]759# */usr/html/autocampars.php --init* >>>> autocampars.php created a new configuration file /etc/autocampars.xml >>>> from defaults. >>>> Current frame=1266, sleeping to give daemons a chance >>>> Current frame=1319, waking up, daemons should be dead already >>>> before reset - current frame=0 >>>> after reset - current frame=2 >>>> setting COMPRESSOR_RUN=2 >>>> setting DAEMON_EN=Array >>>> ( >>>> [DAEMON_EN_AUTOEXPOSURE] => 1 >>>> [DAEMON_EN_STREAMER] => 1 >>>> [DAEMON_EN_CCAMFTP] => 0 >>>> [DAEMON_EN_CAMOGM] => 0 >>>> [DAEMON_EN_TEMPERATURE] => 0 >>>> [DAEMON_EN] => 3 >>>> ) >>>> after setParsFromPage - current frame=12 >>>> Sensor was successfully initialized at August 17, 2018, 11:49 pm from >>>> /etc/autocampars.xml page 0 >>> >>> >>> Regards, >>> Oleg >>> >>> >> _______________________________________________ >> Support-list mailing list >> Support-list@support.elphel.com >> http://support.elphel.com/mailman/listinfo/support-list_ >> support.elphel.com >> > >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
