Wrong file. My bad. Try this one. On Tue, Dec 4, 2018 at 3:17 PM Morsy, Mohamed K <mk...@pitt.edu> wrote:
> Hi Oleg, > > > I tried replacing the devicetree.dtb file in the nand folder from > elphel393_20180511 > with the one you sent. I tried the ipaddress/update_software.html tool > again but nothing changed. When I log into the elphel from minicom and try > ifconfig I still only get the local address at 127.0.0.1. This is on a Rev > C board. Do you have any other ideas? > > > Also I meant to send the previous email from my Redzone email so I'll CC > myself to this chain. > > > Thanks, > > > Mohamed Morsy > > > ------------------------------ > *From:* Oleg <support-list@support.elphel.com> > *Sent:* Tuesday, December 4, 2018 2:51 PM > *To:* Morsy, Mohamed K > *Cc:* elphel support-list > *Subject:* Re: [Elphel-support] Elphel 393 Nand upgrade > > Hi Mohamed, > > I think it's not related. > > Most likely you need an updated device tree (devicetree.dtb). The newest > boards are revC - they have a different PHY reg address compared to revB > (and older). The recovery cards came with updated devicetree - and so, the > network is working. > The revision letter is printed near the network connector on top of the > board. For revC - try devicetree.dtb from the attachment. > > fix_net_config.tar.gz - just moves network configuration from > /etc/elphel393/init_elphel393.py to /etc/network/interfaces which is a more > conventional place for linux. And it will be included in the next release. > > I'm having trouble upgrading the NAND memory on an elphel 393. I've tried > it with multiple boards. I used the ipaddress/update_software.html tool. > When I flash the board, I shut it down, remove the uSD card, and reboot it. > But it doesn't boot up correctly. I'm able to log in on minicom but when I > try ifconfig I find that the board doesn't have an ip address. Do you know > how to resolve this issue? I noticed there's a recent upload at > community.elphel.com/files/393 > <https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fcommunity.elphel.com%2Ffiles%2F393&data=02%7C01%7CMKM89%40pitt.edu%7C69e9fd539853460af0b808d65a21ddbc%7C9ef9f489e0a04eeb87cc3a526112fd0d%7C1%7C1%7C636795498844445600&sdata=nmNC%2B4fi8iv%2FKJk2i5mVpAEVZ4r1A5H%2FCS3woLV3%2Bhc%3D&reserved=0> > called fix_net_config.tar.gz. Is that related to my issue? > > Thanks, > Mohamed Morsy > RedZone Robotics > _______________________________________________ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > <https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fsupport.elphel.com%2Fmailman%2Flistinfo%2Fsupport-list_support.elphel.com&data=02%7C01%7CMKM89%40pitt.edu%7C69e9fd539853460af0b808d65a21ddbc%7C9ef9f489e0a04eeb87cc3a526112fd0d%7C1%7C1%7C636795498844455609&sdata=6WuAVJxImp03qJEMvMDpWa%2BCth%2BT%2B3t1bkmiWJ07tGE%3D&reserved=0> > > > _______________________________________________ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 5555 x124 Elphel, Inc.
devicetree.dtb
Description: Binary data
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
