Ray_Net wrote:
I am under Windows XP SP3 and i finally have installed SM2.0.2 without
any problem till now :-) except the following.
This is to inform everybody that he should
- First use add/remove program to Remove SM1.
- Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe.
I had installed SM2 without removing first SM1:
- I encountred a mixed between SM1 and SM2 in the "Start" - "All
Programs" - "Seamonkey"
- Then to eliminate the mix - i used add/remove program to Remove SM1.
- The mix dissappeared - so far so good - BUT also the link to start SM2
by using "Start" - "All Programs" - "Seamonkey"
To remove this problem:
- I used add/remove program to Remove SM1.
- I used add/remove program to Remove SM2.
- And finally i install SM2 by running the donwloaded SeaMonkey Setup
2.0.2.exe.
- Now the "Start" - "All Programs" - "Seamonkey" is ok and suit SM2 only
and completely.
So i repeat:
- First use add/remove program to Remove SM1.
- Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe.
To avoid the problem i encountered.
You could also have used the Properties dialog for the Start menu
shortcuts, to repoint them to the new location for SeaMonkey 2.0. Its a
hassle, I admit, but it would have saved you the ininstall/reinstall of SM2.
Lee
_______________________________________________
support-seamonkey mailing list
[email protected]
https://lists.mozilla.org/listinfo/support-seamonkey
