Florent DANIEL a écrit : > Matthew Toseland a écrit : > >> On Saturday 18 April 2009 09:18:39 Florent DANIEL wrote: >> >>> I've checked my freenet.ini (which hasn't been modified in ages), as a >>> safety I've removed 127.0.0.1 from the bind addresses (after seeing a >>> message from somebody who had this kind of problem), but it still >>> doesn't work. Here's the relevant lines from my configuration : >>> >>> node.bindTo=192.168.1.4 >>> fcp.bindTo=192.168.1.4,0:0:0:0:0:0:0:1 >>> fproxy.bindTo=192.168.1.4,0:0:0:0:0:0:0:1 >>> node.opennet.bindTo=192.168.1.4 >>> >>> Node is running under Linux (Debian). I've checked with a netstat -an, >>> nothing is listening on fcp and fproxy ports (9481 and 8888), nor on >>> node.listenPort or node.opennet.listenPort. >>> >>> I'm a bit lost, does somebody has suggestions ? >>> >>> Regards, >>> >>> Florent >>> >>> >> Does it work if you shut down and restart manually? >> >> > No, the error is still there after a manual stop and start. After a > shutdown a ps doesn't show any leftover process. I've tried to reboot > the PC, but it hasn't changed anything. After reading again the logs, I was quite puzzled by this part :
INFO | jvm 2 | 2009/04/17 19:32:27 | WrapperManager: Initializing... INFO | jvm 2 | 2009/04/17 19:32:27 | WrapperManager: WARNING - The Wrapper jar file currently in use is version "3.3.1" INFO | jvm 2 | 2009/04/17 19:32:27 | WrapperManager: while the version of the Wrapper which launched this JVM is INFO | jvm 2 | 2009/04/17 19:32:27 | WrapperManager: "3.2.3". INFO | jvm 2 | 2009/04/17 19:32:27 | WrapperManager: The Wrapper may appear to work correctly but some features may INFO | jvm 2 | 2009/04/17 19:32:27 | WrapperManager: not function correctly. This configuration has not been tested INFO | jvm 2 | 2009/04/17 19:32:27 | WrapperManager: and is not supported. So I've removed all the wrapper's jar files in bin subdirectory and tried to start Freenet : now it comes up online without problem (except the warning displayed because it hasn't been started via the wrapper). Maybe I should update the wrapper files, but I don't see them in this archive http://downloads.freenetproject.org/alpha/installer/freenet07.tar.gz ? Should I run again the installer ? I've already ran the updater, which hasn't solved the problem. _______________________________________________ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe