Juiceman a écrit :
> On Sun, Apr 19, 2009 at 12:21 PM, Florent DANIEL <fdan...@noos.fr> wrote:
>
>> Florent DANIEL a écrit :
>>
>>> Matthew Toseland a écrit :
>>>
>>>
>>>> On Saturday 18 April 2009 09:18:39 Florent DANIEL wrote:
>>>>
>>>>
>>>>> I've checked my freenet.ini (which hasn't been modified in ages), as a
>>>>> safety I've removed 127.0.0.1 from the bind addresses (after seeing a
>>>>> message from somebody who had this kind of problem), but it still
>>>>> doesn't work. Here's the relevant lines from my configuration :
>>>>>
>>>>> node.bindTo=192.168.1.4
>>>>> fcp.bindTo=192.168.1.4,0:0:0:0:0:0:0:1
>>>>> fproxy.bindTo=192.168.1.4,0:0:0:0:0:0:0:1
>>>>> node.opennet.bindTo=192.168.1.4
>>>>>
>>>>> Node is running under Linux (Debian). I've checked with a netstat -an,
>>>>> nothing is listening on fcp and fproxy ports (9481 and 8888), nor on
>>>>> node.listenPort or node.opennet.listenPort.
>>>>>
>>>>> I'm a bit lost, does somebody has suggestions ?
>>>>>
>>>>> Regards,
>>>>>
>>>>> Florent
>>>>>
>>>>>
>>>>>
>>>> Does it work if you shut down and restart manually?
>>>>
>>>>
>>>>
>>> No, the error is still there after a manual stop and start. After a
>>> shutdown a ps doesn't show any leftover process. I've tried to reboot
>>> the PC, but it hasn't changed anything.
>>>
>> After reading again the logs, I was quite puzzled by this part :
>>
>> INFO | jvm 2 | 2009/04/17 19:32:27 | WrapperManager: Initializing...
>> INFO | jvm 2 | 2009/04/17 19:32:27 | WrapperManager: WARNING - The
>> Wrapper jar file currently in use is version "3.3.1"
>> INFO | jvm 2 | 2009/04/17 19:32:27 | WrapperManager:
>> while the version of the Wrapper which launched this JVM is
>> INFO | jvm 2 | 2009/04/17 19:32:27 | WrapperManager:
>> "3.2.3".
>> INFO | jvm 2 | 2009/04/17 19:32:27 | WrapperManager: The
>> Wrapper may appear to work correctly but some features may
>> INFO | jvm 2 | 2009/04/17 19:32:27 | WrapperManager: not
>> function correctly. This configuration has not been tested
>> INFO | jvm 2 | 2009/04/17 19:32:27 | WrapperManager: and
>> is not supported.
>>
>>
>> So I've removed all the wrapper's jar files in bin subdirectory and
>> tried to start Freenet : now it comes up online without problem (except
>> the warning displayed because it hasn't been started via the wrapper).
>>
>> Maybe I should update the wrapper files, but I don't see them in this
>> archive
>> http://downloads.freenetproject.org/alpha/installer/freenet07.tar.gz ?
>> Should I run again the installer ? I've already ran the updater, which
>> hasn't solved the problem.
>>
> In the same directory, you should find an archive called
> wrapper-linux.zip. This would be where you would find the wrapper
> files Freenet downloads on install. Unfortunately, this is an old
> version also. :(
>
> You can update your files manually from
> http://wrapper.tanukisoftware.org/doc/english/download.jsp. Grab the
> community release for your operating system and architecture.
Thanks for your help, I've downloaded the version 3.3.3, now my node
starts correctly.
_______________________________________________
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
