hi! i followed these steps, and the wiki's as well... still couldnt get my freerunner to "opkg upgrade" or "opkg update" could anyone tell me in a very easy step-by-step way? thanks a lot.
On Sat, Jul 19, 2008 at 12:18 PM, Jim Colton <[EMAIL PROTECTED]> wrote: > The instructions in the wiki have always worked fine for me... > > > On Sat, Jul 19, 2008 at 9:12 AM, Spencer Raymond <[EMAIL PROTECTED]> > wrote: > >> It might be worth while to add these steps somewhere on the wiki. >> >> -SR >> >> On Sat, Jul 19, 2008 at 5:34 AM, Yoann B. <[EMAIL PROTECTED]> wrote: >> >>> >>> Ok, I finally made it work !!!!! >>> >>> So, for those who are under 192.168.0.* network, and ubuntu, here's what >>> I >>> did : >>> >>> ** disconnect from network >>> On freerunner /etc/network/interfaces I replaced by >>> iface usb0 inet static >>> address 192.168.2.202 >>> netmask 255.255.255.0 >>> network 192.168.2.0 >>> gateway 192.168.2.200 >>> up echo nameserver 192.168.2.200 >/etc/resolv.conf >>> >>> In /etc/resolv.conf, replace "nameserver 192.168.0.200" by "nameserver >>> 192.168.2.202" >>> * not very useful, but give it a try >>> Still in freerunner, but on the device : "/etc/init.d/networking restart" >>> >>> Then on my computer's /etc/network/interfaces : >>> auto usb0 >>> iface usb0 inet static >>> address 192.168.2.200 >>> netmask 255.255.255.0 >>> network 192.168.2.0 >>> up iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.2.0/24 & >>> up echo 1 > /proc/sys/net/ipv4/ip_forward & >>> up iptables -P FORWARD ACCEPT & >>> down iptables -D POSTROUTING -t nat -j MASQUERADE -s 192.168.2.0/24 & >>> >>> On computer's, "/etc/init.d/networking/restart". >>> Then, in Firestarter (System -> Administration -> Firestarter), this >>> configuration : >>> - in politic, entry trafic, autorize connections from 192.168.2.202 >>> - autorize service SSH port 22 for 192.168.2.202 >>> >>> And the most important, in Preferences -> Firewall -> Network >>> configuration >>> : >>> Set local network device to "Unknown device (usb0)", and tick "Authorize >>> internet connection sharing" >>> >>> Then "Accept", on my computer it display an error message, but no matter. >>> >>> In a console, ssh [EMAIL PROTECTED] ... and it works !!! >>> >>> Thanks for your help all ! >>> >>> >>> arne anka wrote: >>> > >>> >> And when I try to ping (with network enabled) : >>> >> ~$ ping 192.168.2.202 >>> >> PING 192.168.2.202 (192.168.2.202) 56(84) bytes of data. >>> >> ping: sendmsg: Operation not permitted >>> > >>> > we got that earlier today on the list and it turned out to be the >>> > firewall's fault -- probably your firewall ist shut down when you >>> shutdown >>> > your network. >>> > have a look at the firewall's configuration if so and add a rule for >>> the >>> > openmoko. >>> > >>> > _______________________________________________ >>> > support mailing list >>> > [email protected] >>> > https://lists.openmoko.org/mailman/listinfo/support >>> > >>> > >>> >>> -- >>> View this message in context: >>> http://n2.nabble.com/SSH-into-Freerunner-tp532402p551018.html >>> Sent from the Openmoko Support mailing list archive at Nabble.com. >>> >>> >>> _______________________________________________ >>> support mailing list >>> [email protected] >>> https://lists.openmoko.org/mailman/listinfo/support >>> >> >> >> _______________________________________________ >> support mailing list >> [email protected] >> https://lists.openmoko.org/mailman/listinfo/support >> >> > > _______________________________________________ > support mailing list > [email protected] > https://lists.openmoko.org/mailman/listinfo/support > > -- Best regards, Abel Chang - 張東龍 Graphic & Product Designer http://coroflot.com/changzer --- NOTICE: The information contained in this e-mail is confidential or may otherwise be legally privileged. It is intended for the named recipient only. If you have received it in error, please notify us immediately by reply or by calling the telephone number above and delete this message and all its attachments. Please note that any unauthorized review, copying, disclosing or otherwise making use of the information is strictly prohibited. Thank you.
_______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
