Daniel Benoy wrote: > See if you have the same problem with the official charger. > > Ok, I'll switch it over to the charger later tonight and report back. >> the way I'm plugging it in hasn't changed since It used to charge to >> 100% and stay there. >> > > My theory isn't so good then.. but it's still worth looking in to whether > you're drawing the required current. > > >> erm, i don't know how to tell for sure >> > > This is a Freerunner right? > > Try this: > cat /sys/devices/platform/s3c2440-i2c/i2c-adapter/i2c-0/0-0073/charger_type > > The far right should be the amperage that the charger is currently set to > draw. More details (and other things in sysfs you may want to examine) here: > http://wiki.openmoko.org/wiki/GTA02_sysfs > > If you're plugged directly into the host, you should be getting 500mA, > assuming your operating system is performing power negociation properly. > Hubs can be inconsistant unless they have external power. > Yep, 500mA:
[EMAIL PROTECTED]:~# cat /sys/devices/platform/s3c2440-i2c/i2c-adapter/i2c-0/0-0073/charger_type host/500mA usb mode 500mA Thanks, -Dale _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
