Whoa! It works! Thanks a lot guys! Really appreciate it! =D
On Wed, Oct 8, 2008 at 1:27 PM, Marc Verwerft < [EMAIL PROTECTED]<[EMAIL PROTECTED]> > wrote: > It's a typo. > > It should be /etc/init.d not /etc/inti.d > > Regards, > > Marc > > On Wed, Oct 8, 2008 at 1:19 PM, bum <[EMAIL > PROTECTED]<http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306321&i=0>> > wrote: > > > > > I got the file edited now! > > > > But when I do: > > [EMAIL PROTECTED]:~# /etc/inti.d/networking restart > > -sh: /etc/inti.d/networking: not found > > > > Should I just disconnect and shut down the phone now? > > > > On Wed, Oct 8, 2008 at 1:05 PM, David Samblas-3 < > > [EMAIL > > PROTECTED]<http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306321&i=1> > <[EMAIL > PROTECTED]<http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306321&i=2>> > > >> wrote: > > > >> If you have a terminal app on the neo do /etc/inti.d/networking start > >> from it > >> and the connection will come back > >> if no terminal app shutdown and restart again > >> > >> to edit files trough ssh session or trough the terminal app you can use > >> vi > >> #vi /etc/network/interfaces > >> > >> then put the cursor on the line you want to began to edit and press "i" > >> then you can edit the file and can put the "echo nameserver > >> blablabla..." lines > >> when done and to save the file > >> > >> press esc > >> and then ":wq" > >> > >> /etc/inti.d/networking restart > >> > >> > >> > >> > >> El mié, 08-10-2008 a las 03:50 -0700, bum escribió: > >> > Okay. How shall I put the up echo in the file through neo? > >> > I log in with ssh then...? Regularly I'd use gedit but now I can't. > >> > > >> > I did the echo in the neo then > >> > /etc/init.d/networking stop > >> > But then the connection just hung... > >> > > >> > On Wed, Oct 8, 2008 at 12:38 PM, David Samblas-3 < > >> > [EMAIL PROTECTED]< > http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306274&i=0> > >> <[EMAIL PROTECTED]< > http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306274&i=1>> > >> > >> > > wrote: > >> > > >> > > El mié, 08-10-2008 a las 03:05 -0700, bum escribió: > >> > > > Hello, ubuntu and openmoko newcomer here. > >> > > > > >> > > > I can successfully login to my freerunner with ssh and ping (ping > >> > > > 74.125.19.147) to the outside world but I can't ping to an > address > >> (ping > >> > > > >> > > > www.google.com). > >> > > > > >> > > > I've tried most of the things > >> > > > > >> http://wiki.openmoko.org/wiki/USB_Networking#Configure_Default_Neo_DNS here > > >> > >> > > > >> > > > : > >> > > > My IP changes so I can't use "echo nameserver 'myIP' > > >> /etc/resolv.conf". > >> > > > >> > > > > >> > > > echo nameserver 208.67.222.222 > /etc/resolv.conf > >> > > > echo nameserver 208.67.220.220 >> /etc/resolv.conf > >> > > > even if I don't understand it, but no luck. Getting error > >> > > > > >> > > > "[EMAIL PROTECTED]:~$ sudo echo nameserver 208.67.222.222 > > >> > > > /etc/resolv.conf > >> > > > bash: /etc/resolv.conf: Permission denied" > >> > > > > >> > > > even with sudo... I dunno... > >> > > You have to do the echo stuff in the neo not in you pc > >> > > > > >> > > > Tried placing > >> > > > "up echo nameserver 208.67.222.222 > /etc/resolv.conf > >> > > > up echo nameserver 208.67.220.220 >> /etc/resolv.conf" > >> > > > in "/etc/network/interfaces" but no luck. > >> > > this too has to be done in the neo > >> > > after the interface modification do the following to make it active > >> > > on the neo: > >> > > /etc/init.d/networking stop > >> > > /etc/init.d/networking start > >> > > > >> > > > >> > > > > >> > > > Proxying from desktop/laptop is the thing I'd want though as I > have a > >> > >> > > laptop > >> > > > :-D > >> > > > > >> > > > Tried dnrd but don't know if I did it right... > >> > > > > >> > > > [EMAIL PROTECTED]:~$ sudo gedit /home/treeman/dnrd > >> > > > [sudo] password for treeman: > >> > > > (paste http://buildhost.automated.it/gta01 dnrd script ) > >> > > > [EMAIL PROTECTED]:~$ sudo chmod +x /home/treeman/dnrd > >> > > > [EMAIL PROTECTED]:~$ sudo /home/treeman/dnrd > >> > > > /home/treeman/dnrd: line 97: -a: command not found > >> > > > > >> > > > UDP forwarding link didn't work. > >> > > > > >> > > > Iptables: > >> > > > iptables -t nat -A PREROUTING -p tcp -s 192.168.0.202 -d > >> 192.168.0.200 > >> > > > --dport domain -j DNAT --to-destination 192.168.0.1 > >> > > > iptables -t nat -A PREROUTING -p udp -s 192.168.0.202 -d > >> 192.168.0.200 > >> > > > --dport domain -j DNAT --to-destination 192.168.0.1 > >> > > > no errors but didn't work. > >> > > > > >> > > > Also edited /etc/network/interfaces and added: > >> > > > # freerunner > >> > > > auto usb0 > >> > > > iface usb0 inet static > >> > > > address 192.168.0.200 > >> > > > netmask 255.255.255.192 > >> > > > post-up /etc/network/freerunner start > >> > > > pre-down /etc/network/freerunner stop > >> > > > > >> > > > and /etc/network/freerunner: > >> > > > #!/bin/sh > >> > > > # > >> > > > # configures the freerunner for internet > >> > > > # > >> > > > # > >> > > > > >> > > > DEVICE=usb0 > >> > > > IPADDR=192.168.0.200 > >> > > > REMOTE_IPADDR=192.168.0.202 > >> > > > NETMASK=255.255.255.0 > >> > > > > >> > > > # get first ip for dns > >> > > > DNSIP=$(cat /etc/resolv.conf | grep nameserver | awk '{ print $2 > }' > >> | > >> > > head > >> > > > -n 1 ) > >> > > > > >> > > > case "$1" in > >> > > > start) > >> > > > iptables -A POSTROUTING -t nat -j MASQUERADE -s > >> $REMOTE_IPADDR > >> > > > iptables -A PREROUTING -t nat -p tcp -s $REMOTE_IPADDR -d > >> $IPADDR > >> > > > >> > > > --dport domain -j DNAT --to-destination $DNSIP > >> > > > iptables -A PREROUTING -t nat -p udp -s $REMOTE_IPADDR -d > >> $IPADDR > >> > > > >> > > > --dport domain -j DNAT --to-destination $DNSIP > >> > > > > >> > > > if [ "$(cat /proc/sys/net/ipv4/ip_forward)" = "0" ]; then > >> > > > echo "temoprarely allow ip_forward for openmoko" > > > >> > > > /var/run/openmoko.ip_forward > >> > > > echo 1 > /proc/sys/net/ipv4/ip_forward > >> > > > fi > >> > > > ;; > >> > > > stop) > >> > > > iptables -D POSTROUTING -t nat -j MASQUERADE -s > >> $REMOTE_IPADDR > >> > > > iptables -D PREROUTING -t nat -p tcp -s $REMOTE_IPADDR -d > >> $IPADDR > >> > > > >> > > > --dport domain -j DNAT --to-destination $DNSIP > >> > > > iptables -D PREROUTING -t nat -p udp -s $REMOTE_IPADDR -d > >> > > $IPADDR > >> > > > --dport domain -j DNAT --to-destination $DNSIP > >> > > > > >> > > > if [ -f /var/run/openmoko.ip_forward ]; then > >> > > > rm /var/run/openmoko.ip_forward > >> > > > echo 0 > /proc/sys/net/ipv4/ip_forward > >> > > > fi > >> > > > ;; > >> > > > esac > >> > > > > >> > > > Made executable with "chmod +x /etc/network/freerunner". > >> > > > > >> > > > Also edited the ubuntu bug thing: > >> > > > "One can patch /etc/udev/rules.d/85-ifupdown.rules. Moving the > >> > > DRIVERS=="*?" > >> > > > out of the top GOTO, to ACTION=="add" line fixes the problem." > >> > > > > >> > > > Well there we go, I'm out of ideas and I've tried these steps more > > >> than > >> > > > once. I've rebooted and stuff and now I'm hoping for your help! > >> > > > > >> > > > Regards, bum > >> > > > >> > > > >> > > _______________________________________________ > >> > > support mailing list > >> > > [EMAIL PROTECTED]< > >> http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306232&i=0> > >> > > https://lists.openmoko.org/mailman/listinfo/support > >> > > > >> > > > >> > > ------------------------------ > >> > > View message @ > >> > > http://n2.nabble.com/Trying-to-make-DNS-work-tp1306198p1306232.html > >> > > To unsubscribe from Trying to make DNS work, click here< (link > removed) > >> =>. > >> > > > >> > > > >> > > > >> > > >> > >> > >> _______________________________________________ > >> support mailing list > >> [EMAIL PROTECTED]< > http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306274&i=2> > >> https://lists.openmoko.org/mailman/listinfo/support > >> > >> > >> ------------------------------ > >> View message @ > >> http://n2.nabble.com/Trying-to-make-DNS-work-tp1306198p1306274.html > >> To unsubscribe from Trying to make DNS work, click here< (link removed) > =>. > >> > >> > >> > > > > -- > > View this message in context: > http://n2.nabble.com/Trying-to-make-DNS-work-tp1306198p1306298.html > > Sent from the Openmoko Support mailing list archive at Nabble.com. > > > > > > _______________________________________________ > > support mailing list > > [EMAIL > > PROTECTED]<http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306321&i=3> > > https://lists.openmoko.org/mailman/listinfo/support > > > > _______________________________________________ > support mailing list > [EMAIL > PROTECTED]<http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306321&i=4> > https://lists.openmoko.org/mailman/listinfo/support > > > ------------------------------ > View message @ > http://n2.nabble.com/Trying-to-make-DNS-work-tp1306198p1306321.html > To unsubscribe from Trying to make DNS work, click here< (link removed) =>. > > > -- View this message in context: http://n2.nabble.com/Trying-to-make-DNS-work-tp1306198p1306330.html Sent from the Openmoko Support mailing list archive at Nabble.com. _______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
