-- On Thu, 5/7/09, Angus Ainslie <nyt...@openmoko.org> wrote: > On Thu, 2009-05-07 at 01:47 -0700, halbtaxabo...@yahoo.com > wrote: > > Did that, then in the settings menu, chose 'phone', and > > set the 'message-volume' to 100 which seems to be the max. > > I assume this is the setting for the loudness of incoming > > calls. But, incoming calls are still so quiet as to be > > just barely audible in a quiet environment. > > > > message-volume is the loudness of the sms alert tone.
Aha! So I was setting the wrong parameter. > In the current version there are some situations were the > modem volume > gets reset during call setup and might need adjusting ( > fixing ) during > the call. Use the AUX button to try and adjust it during > the call. This > should be fixed in the next release. The effect of pressing the AUX button after a call started was indeed to change the volume somewhat, but it had the unfortunate side effect that the device became unresponsive to all commands including "End Call". Fortunately, I was only calling the 0800 number that tells me how much credit I have left on my prepaid sim card ... so no charge ... but this isn't a workaround. Any prediction on when the next release might be? Nick _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
