I would be very interested in seeing this enhancement. Just a note to everyone, I remove the need for a 3rd interface on a bridge. You can bridge LAN + WAN together now but its untested :)
Scott On 7/13/05, Tommaso Di Donato <[EMAIL PROTECTED]> wrote: > Bill, > thank you very very much.. Unfortunately I am building a sort of > "embedded" box using an EPIA mobo... so I cannot add a 3rd interface. > After reading your answer (and after I spoke with other m0n0wall > users), I decided to start working just to add some new functions, in > order to be able to bridge the two interfaces. > If you are interested, I can try out this enhancement, and if you like > I will release it... > > On 7/13/05, Bill Marquette <[EMAIL PROTECTED]> wrote: > > > Legacy code that I hope to replace at some future date. m0n0 was > > built with a concept of WAN/LAN/Optional interfaces which is a very > > PIX like concept (inside/outside) but not a terribly scalable concept. > > But those assumptions are quite ingrained into our system so it's > > going to be a challenge to rip it out and replace it. > > > > In the meantime what Holger suggests should work - albeit at the cost > > of a third interface on your filtering bridge. > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
