Ok, I will be pleased to work on it. In my mind, I would like to add an option in Interface (Assign): now there is "Add", i would like to create a "Bridge" button. If this option is chosen, I think that WAN settings should be disabled. If the two interfaces are bridged, I think that LAN settings should be modified: must be possible to add a default gateway. Firewall settings should not be affected by this change... maybe VPN yes (I have to look at it better..) Let me know if this way could be goor for you, Tom
On 7/13/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > I would be very interested in seeing this enhancement. > > Just a note to everyone, I remove the need for a 3rd interface on a > bridge. You can bridge LAN + WAN together now but its untested :) > > Scott > > > On 7/13/05, Tommaso Di Donato <[EMAIL PROTECTED]> wrote: > > Bill, > > thank you very very much.. Unfortunately I am building a sort of > > "embedded" box using an EPIA mobo... so I cannot add a 3rd interface. > > After reading your answer (and after I spoke with other m0n0wall > > users), I decided to start working just to add some new functions, in > > order to be able to bridge the two interfaces. > > If you are interested, I can try out this enhancement, and if you like > > I will release it... > > > > On 7/13/05, Bill Marquette <[EMAIL PROTECTED]> wrote: > > > > > Legacy code that I hope to replace at some future date. m0n0 was > > > built with a concept of WAN/LAN/Optional interfaces which is a very > > > PIX like concept (inside/outside) but not a terribly scalable concept. > > > But those assumptions are quite ingrained into our system so it's > > > going to be a challenge to rip it out and replace it. > > > > > > In the meantime what Holger suggests should work - albeit at the cost > > > of a third interface on your filtering bridge. > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
