FreeBSD is not agreeing with something on your system.  Have you
turned off all extra items such as sound, usb, etc in the bios?

Scott


On 7/30/05, Wesley Joyce <[EMAIL PROTECTED]> wrote:
> Every time.
> 
> > -----Original Message-----
> > From: Scott Ullrich [mailto:[EMAIL PROTECTED]
> > Sent: Saturday, July 30, 2005 2:09 PM
> > To: Wesley Joyce
> > Cc: [email protected]
> > Subject: Re: [pfSense Support] Issue installing 0.71.12 ISO to HD
> >
> > Does this happen every time you attempt an install or did you only try
> > once?
> >
> > Scot
> >
> >
> > On 7/30/05, Wesley Joyce <[EMAIL PROTECTED]> wrote:
> > >
> > >
> > >
> > > The exact error I am getting installing 0.71.12 to HD is as follows.
> > After
> > > doing all the partitioning and selecting of file systems, at
> > >
> > >
> > >
> > > 50% of the '/FreeSBIE/usr/local/bin/cpdup .' command being executed I
> > get a
> > >
> > >
> > >
> > > Panic: vm_fault: fault on nofault entry: c780400
> > >
> > > Cupid = 0
> > >
> > > Uptime 1m38s
> > >
> > > Dumping 126mb (2 chunks)
> > >
> > >             Chunk 0: 1mb (159 pages) . ok
> > >
> > >             Chunk 1: 126MB (32174 pages) 110 94 78 62 46 30 14 . ok
> > >
> > >
> > >
> > > Dump complete
> > >
> > > .snip.
> > >
> > >
> > >
> > >  ________________________________
> > >
> > >
> > > Wesley Joyce, Network Administrator
> > >  Network Operations, Information Technology Services
> > >  University of the Virgin Islands
> > >  #2 John Brewers Bay, St. Thomas, USVI 00802-9990
> > >  (340) 693-1469 (voice) / (340) 693-1545 (fax)
> > >  http://www.uvi.edu/
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >  ________________________________
> > >
> > >
> > > From: Wesley Joyce [mailto:[EMAIL PROTECTED]
> > >  Sent: Saturday, July 30, 2005 1:37 PM
> > >  To: 'analyzerx'; [email protected]
> > >  Subject: RE: [pfSense Support] Pre 0.7x ISO
> > >
> > >
> > >
> > > Thanks.
> > >
> > >
> > >
> > > I have tried to install pfSense-LiveCD-0.71.12, pfSense-LiveCD-0.716,
> > > pfSense-LiveCD-0.70.10 and pfSense-LiveCD-0.70.4 ISO's to hard drive
> > using
> > > the 'installer' and they all either dump during the copy of files to the
> > > partition, or after rebooting from the hard drive the 1st time, it
> > complains
> > > about the hard drive and files not being found.  I previously got the
> > 0.6x
> > > series to install.
> > >
> > >
> > >
> > > Is it supports installing 0.6x and upgrading to the latest 0.71?
> > >
> > >
> > >
> > >  ________________________________
> > >
> > >
> > > Wesley Joyce, Network Administrator
> > >  Network Operations, Information Technology Services
> > >  University of the Virgin Islands
> > >  #2 John Brewers Bay, St. Thomas, USVI 00802-9990
> > >  (340) 693-1469 (voice) / (340) 693-1545 (fax)
> > >  http://www.uvi.edu/
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >  ________________________________
> > >
> > >
> > > From: analyzerx [mailto:[EMAIL PROTECTED]
> > >  Sent: Saturday, July 30, 2005 1:27 PM
> > >  To: [email protected]
> > >  Subject: Re: [pfSense Support] Pre 0.7x ISO
> > >
> > >
> > >
> > > What seems to be the problem with the installation?
> > >
> > >  I'm uploading it to my web server in any case, it will take some time
> > cause
> > > I only have 128kbps upload... o_O
> > >  I'll post the URL once it's done...
> 
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to