Hi all, I'm trying to get pfSense working on my EPIA setup with the following configuration:
* EPIA PD10000 (C3 1Ghz "Nehemiah", dual LAN connection, Mini-ITX) * 512MB DDR SDRAM (KingMax) * PQI DiskOnModule (256MB Capacity) * Morex Procase/Cubid 2677 Mini-ITX case with 60W PSU * Intel i82559 NIC (PCI card) I used this image => pfSense-Embedded-0.73-megs.bin.gz (Dated : 04-Aug-2005 00:31, 28.2MB) And used Manuel Kasper's "physdiskwrite" tool to write the image onto the 256MB DOM in Win2k Pro SP4. That was OK, until when I tried to boot with it... The following is what appears : FreeBSD/i386 bootstrap loader, Revision 1.1 ([EMAIL PROTECTED], Sun Jul 31 22:20:50 UTC 2005) Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x523f93 data=0x7f48c+0x43c20 \ \ Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... /boot/kernel/acpi.ko text=0x409fc data=0x2060+0x1090 syms=[0x4+0x7680+0x4+0x9ddd] \ At this point, it just hangs. I previously used the same system for M0n0Wall ver 1.1, and it worked fine. I currently have two Cable ISP connections which I want to use pfSense on. (consolidate two routers into one with pfSense's multi-WAN capability). Can anyone help or explain what the above means? Regards -Stmok --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
