This was with 0.80.2? Scott
On 8/26/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > It worked this time. Not sure why the last attempt failed. > > 256MB RAM for the virtual machine > 4GB of disk > > This time around, the installer didn't error out, didn't reboot, and I got > the intaller asking about boot blocks and then asking me to reboot and > remove the hard drive. > > What is strange is that when I ran with CD on IDE 1:0 it failed every time. > When I changed it to run on IDE 0:1 it failed the first time, but worked > the second time around. I hate it when computers are inconsistent. Grrr. > > > > At 12:05 PM 8/26/2005, Scott Ullrich wrote: > >How much ram do you have? 128 is the recommended minimum. > > > >On 8/26/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > > At 11:53 AM 8/26/2005, Scott Ullrich wrote: > > > >0.71? Thats OLD. > > > > > > > >Please download a 0.80 series iso. > > > > > > No, .71 was the version I just checked, and that ~works~. 0.80 is the one > > > that failed. > > > > > > I just retried (after moving the CD to be the slave of the hard drive), > > > and > > > I found the source of the reboot (reboot before the 0.80 installation was > > > done). > > > > > > I get an error regarding no dump space available. The message went by too > > > fast for me to capture. This was during the installer. > > > > > > Trying again, will try and capture the exact message. > > > > > > > > > > > > -- > > > [EMAIL PROTECTED] > > > > > > > > -- > [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
