The only LiveCD's that I found on 4 different sites were
"pfSense-LiveCD-0.80.iso", with no minor version appended. After looking at
4 sites, I stopped trying to find any more versions.
According to my System:Firmware:AutoUpdate page:
Category Installed Current
Firmware 0.80 0.68.3
Kernel 6.0.0 6.0.0
Base 6.0.0 6.0.0
According to System Status:
0.80
built on Wed Aug 24 22:07:36 UTC 2005
(Note: Current is showing up as 0.68.3, even though I have Alpha selected.
Is that correct?)
At 12:13 PM 8/26/2005, Scott Ullrich wrote:
This was with 0.80.2?
Scott
On 8/26/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> It worked this time. Not sure why the last attempt failed.
>
> 256MB RAM for the virtual machine
> 4GB of disk
>
> This time around, the installer didn't error out, didn't reboot, and I got
> the intaller asking about boot blocks and then asking me to reboot and
> remove the hard drive.
>
> What is strange is that when I ran with CD on IDE 1:0 it failed every time.
> When I changed it to run on IDE 0:1 it failed the first time, but worked
> the second time around. I hate it when computers are inconsistent. Grrr.
>
>
>
> At 12:05 PM 8/26/2005, Scott Ullrich wrote:
> >How much ram do you have? 128 is the recommended minimum.
> >
> >On 8/26/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> > > At 11:53 AM 8/26/2005, Scott Ullrich wrote:
> > > >0.71? Thats OLD.
> > > >
> > > >Please download a 0.80 series iso.
> > >
> > > No, .71 was the version I just checked, and that ~works~. 0.80 is
the one
> > > that failed.
> > >
> > > I just retried (after moving the CD to be the slave of the hard
drive), and
> > > I found the source of the reboot (reboot before the 0.80
installation was
> > > done).
> > >
> > > I get an error regarding no dump space available. The message went
by too
> > > fast for me to capture. This was during the installer.
> > >
> > > Trying again, will try and capture the exact message.
> > >
> > >
> > >
> > > --
> > > [EMAIL PROTECTED]
> > >
> > >
>
> --
> [EMAIL PROTECTED]
>
>
--
[EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
