You do have 2 nics in each box, right? On 9/6/05, Richard Davis <[EMAIL PROTECTED]> wrote: > This is probably a newbie question but I have loaded pfsense on the hard > drive on PC "A" and have a cross over cable going to another PC(PC B). > I configured the PC "B" with an IP in the same range(192.168.1.10\24 > .....the default on the pfsense box is 192.168.1.1\24). I can not http > or ping box "A" from box "B" so I told box "A" to ping its IP > address(192.168.1.1). I get a no route to host. > > I know that the 2 PC's and their ethernet cards work because I loaded > Star-os on one and pinged it from the other(Win 2000). My install was > stright from the installer command off a CD that booted. > > Normally I don't have this type of problem. I figured that an generic > install from the CD would not cause problems. Any suggestions? Thanks > in advance > > Richard > [EMAIL PROTECTED] > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
