Tried via both. Used to be able to query via VIP's before I thought.
Do you think VIP's will not query > -----Original Message----- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: 10 October 2005 19:27 > To: [email protected] > Subject: Re: [pfSense Support] snmpd and 0.68.4 on wrap > > Are you querying the machine via a virtual ip or via its real ip? > > On 10/10/05, alan walters <[EMAIL PROTECTED]> wrote: > > > > > > > > We have a wrap board that runs on failover system. > > > > There are about 25 VIP addresses on this system and 8 vlans. > > > > We are having problems with snmpd. > > > > > > > > It does not respond to a snmpwalk. Netstat says it is listening on all > ports > > > > Top says that it is running. There are no blocks in the firewall denying > the > > traffic there is nothing in the pfstate table. > > > > Checked /var/run and there is a .sock a .pid and a .conf for snmpd. > > > > > > > > All other boxes that we run are running just fine. I am stumped. I am > > thinking it has something to do with the number of VIPS. As all other > sites > > use vlans and the configuration for snmpd is the same > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
