On 10/16/05, Manuj Aggarwal <[EMAIL PROTECTED]> wrote: > Hi > > I have 2 WAN connections. The first WAN is ADSL (PPPoE). The second > connection is a high speed cable modem. I wanted to set cable modem as > the first WAN connection - but since OPT1 does not support PPPoE I was > forced to set it up this way. > > My SMTP server and NEWS servers are available from my DSL ISP and all > other traffic needs to be routed through my OPT1. I have taken following > steps to set this up: > > 1. I checked and saved Enable advanced outbound NAT. > 2. Setup Any -> Any rule for internal network to OPT1 (very similar to > the automatic rule created for WAN1) > 3. Setup a Gateway by specifying a single Gateway in the pool (my DSL > gateway). > 4. Then I setup a rule for pass rule to for port 119 and 25 on WAN1 and > set its gateway to the gateway setup in no. 3 > > After setting this up - I still cannot connect to my SMTP and NNTP > servers via my WAN1. All traffic through OPT1 is working fine. > > Any help will be much appreciated.
Heh...good timing, I just fixed this last night and needed someone to test :) Those fixes will be MFC'd later today and should show up in the next release. --Bill --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
