Please show the contents of: cat /tmp/rules.debug | grep 700
from a shell. Thanks! On 10/23/05, Kevin Wolf <[EMAIL PROTECTED]> wrote: > Bill Marquette wrote: > > >On 10/23/05, Kevin Wolf <[EMAIL PROTECTED]> wrote: > > > > > >>And, outbound NAT rules still don't seem to be working. I set the rule > >>up with the same settings I had in 0.86.4, moved the rule above the > >>default rule, applied, made a normal port forwarding rule / firewall > >>entry and applied, and the traffic still isn't actually coming out of > >>the WAN interface from pfSense on port 7700 like it's supposed to > >>according to the rule I set. > >> > >> > > > >Ummm, port forwarding is to send traffic to some IP address to a > >different IP address. What you want is "advanced outbound NAT", > >unsurprisingly, in the Outbound NAT screen. Works fine for my IPSec > >connections, which all require udp 500 as the source port. > > > >--Bill > > > >--------------------------------------------------------------------- > >To unsubscribe, e-mail: [EMAIL PROTECTED] > >For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > Just to make sure I didn't mistype anything, here's what my config looks > like: > http://img444.imageshack.us/img444/3802/untitled1vb.jpg > > And a little background... the way this game works is it's > peer-to-peer. Also, it sends packets back not according to the port > that would normally be inside the packet or the port that the main > server reports, but the other client sends packets back to the port that > it looks like it's coming from. So looking at this screenshot: > http://img448.imageshack.us/img448/8843/untitled25fi.jpg > > You can tell the port that I'm getting all the traffic on is not 7700. > This means that the port that I'm sending on through the WAN is not 7700 > like it should be according to the rule I made. I even doublechecked > that my IP was typed correctly and the settings in my game were right. > I can only get this game working in 0.89.2 if I use 1:1. I got the game > working with advanced outbound NAT in 0.86.4. The same exact setup in > 0.89.2 is not working for me. > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
