Well, I tried the 0.93.2 and it has the same behavior :( I tried with a different NIC for the WAN, but the problem seems the same.
I'm posting my "system.log", I replaced the IP addresses like this: XXX.XXX.XXX.XXX -> Gateway address YYY.YYY.YYY.YYY -> IP address assigned to the WAN interface BBB.BBB.BBB.BBB -> Broadcast address DNS.DNS.DNS.DNS -> DNS server address I hope this may be useful. I'm going back to 0.92 again :( Thanks Scott, I'll wait for the next release to give it a try :) Emanuel Gonzalez Guatemala -----Mensaje original----- De: Emanuel A. Gonzalez [mailto:[EMAIL PROTECTED] Enviado el: Domingo, 13 de Noviembre de 2005 09:25 p.m. Para: [email protected] Asunto: RE: [pfSense Support] WAN DHCP not working ? Surf to: http://www.pfsense.com/~sullrich/ Thanks Scott, I'll try it tonight... -----Mensaje original----- De: Lists [mailto:[EMAIL PROTECTED] Enviado el: Domingo, 13 de Noviembre de 2005 09:21 p.m. Para: [email protected] Asunto: Re: [pfSense Support] WAN DHCP not working ? where is this image ? On Sun, 2005-11-13 at 21:34 -0500, Scott Ullrich wrote: > Image updated. Please give it a try in the ~sullrich directory. > > On 11/13/05, Emanuel A. Gonzalez <[EMAIL PROTECTED]> wrote: > > Thanks again Scott! > > > > > > -----Mensaje original----- > > De: Scott Ullrich [mailto:[EMAIL PROTECTED] > > Enviado el: Domingo, 13 de Noviembre de 2005 06:39 p.m. > > Para: [email protected] > > Asunto: Re: [pfSense Support] WAN DHCP not working ? > > > > That is the issue we just solved. I am building a new version. > > > > On 11/13/05, Emanuel A. Gonzalez <[EMAIL PROTECTED]> wrote: > > > I was working on 0.90a version, and since version 0.62.3 the DHCP on my > > wan > > > was working fine. > > > > > > Today I upgraded to a 0.93 version, which I downloaded from a "sullrich" > > > link (I know this is not an official release). Now, my dhcp wan doesn't > > > work, it assign an IP address for about 20 secs. And then it release it, > > and > > > re-assign it after 20 or 30 secs. > > > > > > I try using a static IP on my wan interface, since my ISP uses a DHCP > > server > > > but it always assigns me the same public IP (that's funny), but it works > > > almost the same way. I can ping for about 10 times, then the connections > > > drops, then again it restore my connection and I can ping again. This is > > > odd. > > > > > > I decided to downgrade to 0.90a, and the wan DHCP client it's working fine > > > again. > > > > > > I'm sorry for hijacking another post, I just intended to help, maybe this > > is > > > a bug :) > > > > > > Thanks again for all your support, we are more than satisfied with your > > > outstanding job! > > > > > > > > > Emanuel Gonzalez > > > Guatemala. > > > > > > > > > > > > -----Mensaje original----- > > > De: Scott Ullrich [mailto:[EMAIL PROTECTED] > > > Enviado el: Domingo, 13 de Noviembre de 2005 03:10 a.m. > > > Para: [email protected] > > > Asunto: Re: [pfSense Support] WAN DHCP not working ? > > > > > > DHCP generally "just works". I would verify that your hardware is > > > FreeBSD friendly at this point as it can be very picky. > > > > > > Scott > > > > > > On 11/13/05, Ulrik S. Kofod <[EMAIL PROTECTED]> wrote: > > > > I'm finally ready to go live with this box, replacing a really horrible > > > router that > > > > has to be reset every now and then (daily). > > > > > > > > I unplugged the old router and inserted the WAN cable from the DSL modem > > > into the > > > > WAN interface on the pfSense box, I then checked the interfaces status > > > page and > > > > could se that the link was up and dhcp said up but the IP address was > > > 0.0.0.0 and > > > > netmask was 255.0.0.0. I tried to release it at renew a few times but > > > without > > > > result. I then tested it in the OPT1 interface with same result. > > > > > > > > The WAN and OPT1 interfases are both setup to get an IP from DHCP, > > nothing > > > else > > > > changed. > > > > > > > > I added a print screen of it here if my explanation is a little > > confusing > > > :) > > > > http://www.cybersite.dk/wan_dhcp.GIF > > > > > > > > Do I need to setup anything except make sure the interface is setup as > > > DHCP like the > > > > on old router? > > > > > > > > Best regards > > > > Ulrik > > > > > > > > PS. I reinstalled the old router and it got the IP like it should. > > > > PPS. I'm using pfSense version 0.92 on a 233MHz pentium with 64MB memory > > > and a 2GB HDD. > > > > PPPS. Apart from WAN and OPT1 I also have a LAN and WLAN interfase with > > > static IP. > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > -- > > > Se certificó que el correo Saliente no contiene virus. > > > Verificado por Anti-Virus AVG. > > > Versión: 7.1.362 / Base de datos de virus: 267.13.0/167 - Fecha de la > > > versión: 11/11/2005 > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > -- > > Se certificó que el correo Saliente no contiene virus. > > Verificado por Anti-Virus AVG. > > Versión: 7.1.362 / Base de datos de virus: 267.13.0/167 - Fecha de la > > versión: 11/11/2005 > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- Se certificó que el correo Saliente no contiene virus. Verificado por Anti-Virus AVG. Versión: 7.1.362 / Base de datos de virus: 267.13.0/167 - Fecha de la versión: 11/11/2005 --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- Se certificó que el correo Saliente no contiene virus. Verificado por Anti-Virus AVG. Versión: 7.1.362 / Base de datos de virus: 267.13.0/167 - Fecha de la versión: 11/11/2005
system.log
Description: Binary data
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
