Did you enable the serial console on VMWare dev edition? On 12/21/05, Rajkumar S <[EMAIL PROTECTED]> wrote: > Hi, > > I am having difficulty accessing serial console from my a PC running embedded > image from > my work PC. My work PC is running Linux. I have connected a serial cable from > the work pc > to pfsense PC. I test the serial cable by running echo and cat at two ends, > ie pfsense PC > running dev edition and my linux pc. > > In pfSense: > # echo "test" > /dev/ttyd0 > > In Linux: > [EMAIL PROTECTED]:~$ cat /dev/ttyS0 > test > > So the serial cable is fine. Now I have put minicom at 9600 8/N/1 and when I > boot embedded > image, the pfSense pc stops at: > > Loading /boot/defaults/loader.conf > | > > I also tried Terra Term in windows as in tutorial and the results are the > same. I am stuck > here. Any one to hit me with a clue stick? > > regards, > > raj > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
