Following up to myself...
On Tue, 3 Jan 2006, Charles Sprickman wrote:
# ps -auxw|grep ftp
proxy 551 0.0 0.4 1276 884 ?? Ss Sun10PM 0:00.78
/usr/local/sbin/pftpx -c 8021 -g 8021 192.168.0.254
Problem one, apparently pftpx isn't notified about LAN IP change, so it
still was doing something with the old LAN IP.
So I killed it and then tried to run it again with the same args, but with a
different IP to bind to:
# /usr/local/sbin/pftpx -c 8021 -g 8021 192.168.0.1
pftpx: bind failed: Can't assign requested address
Apparently it tries to bind to the loopback (127.0.0.1).
After some looking around for anything else listening on those ports and
not finding anything and then running pftpx with full debugging, I thought
I'd check out if anything odd was going on with the loopback:
lo0: flags=8048<LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
See anything interesting there? :)
No IPv4 IP address.
ifconfig'd lo0 with 127.0.0.1 and started pftpx and all is well.
Any idea where my loopback went?
Thanks,
Charles
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
