Hi all,
I've defined some vlans on both of my carp'ed pf boxes. Now I'm a bit confused
because they don't show up in web ui under interfaces. So how do I assign IPs
to them?
pfSense 1.0b1.
# ifconfig
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::2d0:b7ff:fe10:27a9%fxp0 prefixlen 64 scopeid 0x1
inet 81.24.100.2 netmask 0xffffff00 broadcast 81.24.100.255
ether 00:d0:b7:10:27:a9
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
fxp1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::290:27ff:fe8c:59d5%fxp1 prefixlen 64 scopeid 0x2
inet 10.0.0.2 netmask 0xffffff00 broadcast 10.0.0.255
ether 00:90:27:8c:59:d5
media: Ethernet autoselect (10baseT/UTP)
status: active
fxp2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::2d0:b7ff:fe84:fa9f%fxp2 prefixlen 64 scopeid 0x3
inet 10.0.1.2 netmask 0xffffff00 broadcast 10.0.1.255
ether 00:d0:b7:84:fa:9f
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
fxp3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
ether 00:07:e9:94:6c:c5
media: Ethernet autoselect (none)
status: no carrier
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33208
pfsync0: flags=41<UP,RUNNING> mtu 1348
pfsync: syncdev: fxp2 maxupd: 128
vlan0: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:90:27:8c:59:d5
media: Ethernet autoselect (10baseT/UTP)
status: active
vlan: 502 parent interface: fxp1
vlan1: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:d0:b7:10:27:a9
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
vlan: 501 parent interface: fxp0
vlan2: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:90:27:8c:59:d5
media: Ethernet autoselect (10baseT/UTP)
status: active
vlan: 503 parent interface: fxp1
carp0: flags=49<UP,LOOPBACK,RUNNING> mtu 1500
inet 10.0.0.1 netmask 0xffffff00
carp: MASTER vhid 1 advbase 1 advskew 0
--
Jure Pečar
http://jure.pecar.org
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
