Hi DB, Have you been able to install PFSense on that machine at all ever? As it sound more like a hardware issue or incompatibility with something in your hardware arrangement.
However, it is not uncommon to have new RAM fail out of the box. I have experienced that before. It will at least confirm that you have known good RAM. What other Hardware is in your system and brands and chipsets etc, so that anyone else may have an idea if it is an incompatibility problem that you may be experiencing. So then be able to give you some sound advice. I had a customer a few years ago that was using a propriety system and tried to run a Linux version on it, but had similar issues, it happened to be the system. And hardware incompatibility with that O/S. Does it appear to be doing a memory dump and unloading or is it continuing to load? What happens after you see the hex, does it eventually reboot by itself or just hang? Kindest Regards, Craig Roy Horizon IT Consultants -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Saturday, 22 April 2006 10:53 PM To: [email protected] Cc: Craig Roy Subject: RE: [pfSense Support] Re: Booting problem Citat Craig Roy <[EMAIL PROTECTED]>: > My suggestion would be to download the ISO again from another mirror, just > in case their image has become corrupted. I have a beta 2 iso and it fails the same way. > If you press the Pause Break key when it starts to run the garbage hex, > will > it pause so that you can get the start of it to find the address of the > error to assist in diagnosis? Sorry but no :-( Thanks anyway :-) Best regards db --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.1.384 / Virus Database: 268.4.5/321 - Release Date: 21/04/2006 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.1.384 / Virus Database: 268.4.5/321 - Release Date: 21/04/2006 --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
