The test system is a WRAP 2c. It has 128M of ram, 2 ethernet nics. I plugged in an MP2111 mini pci 802.11b radio into the board. This was necessary so that I could assign the 2 nics to LAN and OPT for bridging. The radio was unconfigured and assigned to WAN.
On 4/27/06, Scott Ullrich <[EMAIL PROTECTED]> wrote: > Ouch. That's not good. Can you describe the hardware itself? What > components are in it, chipsets, etc? > > On 4/27/06, rabbtux rabbtux <[EMAIL PROTECTED]> wrote: > > All, > > > > Have been trying to upgrade our AP systems from a pebble based system > > to something newer and stable. Just finshed a several day trial of a > > newer m0n0wall based distro called pfsense. Loved advanced FW and > > traffic shaping available. Configured simple bridge & shaper and put > > it inline with our system. Great voip response, less delay due to > > priority DNS, etc. On the 128M wrap board I used it went 2 days+ then > > locked up. (it was running 500Kb/s to 1Mb/s during the trial) > > > > The wrap board has a watchdog timer, does pfsense use it? If not, > > can it be added. I'm a linux guy with no BSD experience, but > > offerings like m0n0wall and pfsense are tempting me to look deeper :-) > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
