Hi Holger We edited the page as directed, but the problem (no wpa authentication required) still persists.
Kind regards, Rory On 06/06/06, Holger Bauer ([EMAIL PROTECTED]) wrote: > Yeah, we noticed this behaviour too and have already a workaround in > place to prevent this from happening in the next version. To patch > your version please go to Diagnostics>edit file in the webgui and open > /etc/inc/interfaces.inc (just to make sure you have no typo in the > path, you should see a php fragment). Then replace the complete > content with > http://pfsense.com/cgi-bin/cvsweb.cgi/pfSense/etc/inc/interfaces.inc?rev=1.176.2.117;content-type=text%2Fplain > and hit save. Reboot and retest. > > Holger > > > -----Original Message----- > > From: Rory Campbell-Lange [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, June 06, 2006 12:00 PM > > To: [email protected] > > Subject: [pfSense Support] WPA problems -- atheros card wlan open > > > > > > Hi. I'm using PFSense on a Wrap board, Atheros card and the > > latest beta > > release of PFSense. > > > > lan : ethernet 10.0.0.0/24 > > wan : not used > > opt1 : wlan bridged with lan > > opt2 : ethernet pfsense management subnet on 172.x > > > > Previously WPA/WPA2 worked well, but after several reconfigs > > later, opt1 > > is running without any encryption at all -- the network is open. > > > > Have I managed to mess the config up so that it is in an inconsistent > > state? The plan is to support multiple WPA/WPA2 OSX Panther and Tiger > > laptops. > > > > Thanks for any help, > > Rory > > > > > > <opt1> > > <descr>OPT1</descr> > > <if>ath0</if> > > <wireless> > > <standard>11g</standard> > > <mode>hostap</mode> > > <protmode>off</protmode> > > <ssid>wlanname</ssid> > > <channel>0</channel> > > <authmode></authmode> > > <txpower>99</txpower> > > <distance/> > > <wpa> > > <macaddr_acl></macaddr_acl> > > <auth_algs>2</auth_algs> > > <wpa_mode>3</wpa_mode> > > <wpa_key_mgmt>WPA-PSK</wpa_key_mgmt> > > <wpa_pairwise>TKIP</wpa_pairwise> > > <wpa_group_rekey>60</wpa_group_rekey> > > <wpa_gmk_rekey>3600</wpa_gmk_rekey> > > <passphrase>t3st</passphrase> > > <ext_wpa_sw></ext_wpa_sw> > > <enable/> > > <wpa_strict_rekey/> > > </wpa> > > <wep> > > </wep> > > <hidessid/> > > </wireless> > > <bridge>lan</bridge> > > <enable/> > > <ipaddr/> > > <subnet>32</subnet> > > <gateway/> > > <spoofmac/> > > <mtu/> > > <disableftpproxy/> > > </opt1> > > > > > > > > > > > > -- > > Rory Campbell-Lange > > <[EMAIL PROTECTED]> > > <www.campbell-lange.net> > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > ____________ > Virus checked by G DATA AntiVirusKit > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > -- Rory Campbell-Lange <[EMAIL PROTECTED]> <www.campbell-lange.net> --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
