That's the whole point. Please read the documentation, and research 1:1
NAT to see why it will work for this purpose.
A. Jones wrote:
I can't set up a 1:1 as the wan interface is on a different subnet
than my lan interface....
From: "Tim Dickson" <[EMAIL PROTECTED]>
Reply-To: [email protected]
To: <[email protected]>
Subject: RE: [pfSense Support] Can't get basic routing to work.
Date: Fri, 4 Aug 2006 12:13:53 -0700
If bridging is not an option I would recommend setting 1:1 mappings for
each public address. It will work beautifully and will also allow you
to set up two separate networks.
-Tim
-----Original Message-----
From: A. Jones [mailto:[EMAIL PROTECTED]
Sent: Friday, August 04, 2006 7:29 AM
To: [email protected]
Subject: [pfSense Support] Can't get basic routing to work.
I can't get the most basic of basic routing to work.
Here's my network setup....
Intel computer with 512 ram and new xeon.
Two Intel PWLA8492MT Dual port Gig-E Cards plus 2 onboard intel Gig-E
ports.
DSL Modem (Subnet A)
|
pfSense WAN (Subnet A)
|
PfSense LAN (Subnet B)
|
Computers with static public IPs (Subnet B)
Bridging is not an option as in the near future I want to cut subnet B
into two subnets and put each half subnet onto different interfaces.
I've tried going to advanced NAT and deleting all the rules while having
subnet B on LAN.
Deleting all the NAT rules while having subnet B on OPT1.
DISABLING THE FIREWALL!!! while having subnet B on LAN/OPT1.
I just can't get packets to get through.....
The joke is that it all works fine when I use the default rule created
for NAT.
But I don't want or need NAT for this setup.
I MUST have public, static IPs on the computers.... =o/
Please help!!!!
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's
FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED] For additional
commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's
FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
