I tried both and no dice.
That's why I'm completely vexed and why I posted to the mailing list... =o/
The odd thing is that it works with NAT enabled.
Any other guesses as to what could possibly be going on?
Thanks.
From: "Scott Ullrich" <[EMAIL PROTECTED]>
Reply-To: [email protected]
To: [email protected]
Subject: Re: [pfSense Support] Can't get basic routing to work.
Date: Fri, 4 Aug 2006 16:29:50 -0400
On 8/4/06, A. Jones <[EMAIL PROTECTED]> wrote:
I have a whole subnet, routing is what I need.
The computers also MUST have public IP addresses assigned to their
interfaces.
That will also screw me over when one of the subnets needs to talk to the
other subnet using public IPs....
http://faq.pfsense.com/index.php?action=artikel&cat=8&id=29&artlang=en
I also would have to get my ISP to change the routing to my network as the
routing currently is
xxx.xxx.xx1.001 modem
xxx.xxx.xx1.002 WAN
xxx.xxx.xx2.001 LAN
xxx.xxx.xx2.002 Computer
xxx.xxx.xx2.003 Computer
xxx.xxx.xx2.004 Computer
xxx.xxx.xx2.005 Computer
and the static route is xxx.xxx.xx2.xxx/26 xxx.xxx.xx1.002
so there are no "extra" IPs on the outside with which to do 1:1 to begin
with.
I just want simple, simple, simple, basic, routing!!!!!
Packet goes in one interface, firewall rules executed, packet goes out
other
interface with destination unaltered...
You have two options.
#1 - Visit Firewall -> NAT -> Advanced outbound nat. Enable. Now
remove all of the auto created rules, save.. This will give you a
Filtering / Routing platform.
#2 - Visit System -> Advanced -> Disable Firewall - This will
disable NAT and Filtering leaving a routing only platform.
Scott
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
_________________________________________________________________
Dont just search. Find. Check out the new MSN Search!
http://search.msn.click-url.com/go/onm00200636ave/direct/01/
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
