I have done a fresh RC2 install. After that I did install the last squid version (0.4) and it's working as transparent proxy.
But when I set the traffic shapping rules I got all my http/https traffic on the default queue. I did look at the logs and I'm getting these two errors: - "php: : SQUID is installed but not started. Not installing redirect rules" - "Squid_Alarm[1384]: Squid has resumed. Reconfiguring filter." Is someone getting this behavior with squid?? Thanks in advance for your help!!! Emanuel Gonzalez Guatemala -----Mensaje original----- De: Scott Ullrich [mailto:[EMAIL PROTECTED] Enviado el: Sábado, 12 de Agosto de 2006 02:11 p.m. Para: [email protected] Asunto: Re: [pfSense Support] Squid package On 8/12/06, Charles Sprickman <[EMAIL PROTECTED]> wrote: > I know the last time I played with squid I found that it's startup routine > did not include running "squid -z" to initiate the cache. Try that from > the shell and see if squid then starts properly. That should be fixed. You need to uninsall and reinstall the package and it should work. If not you will need to clear the previous squids configuration from config.xml and remove /tmp/rules.debug. Scott --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- Se certificó que el correo Saliente no contiene virus. Verificado por Anti-Virus AVG. Versión: 7.1.405 / Base de datos de virus: 268.10.9/417 - Fecha de la versión: 11/08/2006 --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
