Same installation of 1.0-RC3 (on WRAP) but msntp
works fine...
Oct 3 09:08:31 msntp[8889]: msntp: 2006 Oct 03 09:08:31.947 + -0.000 ±
0.028 secs
Oct 3 09:08:31 msntp[8889]: msntp: after 1.2 secs acc. 1 rej. 0 flush 0
max.off. 0.078 corr. 0.078
Oct 3 09:08:31 msntp[8889]: msntp: using NTP server ntp.ien.it
(193.204.114.105)
Oct 3 09:08:31 msntp[8889]: msntp: different parameters for restart
Oct 3 09:08:31 msntp[8889]: d=18000 c=5 x=18000 op=1 l=/var/run/msntp.pid
f=/var/db/msntp.state 193.204.114.105
Oct 3 09:08:30 msntp[8889]: msntp options: a=2 p=0 v=1 e=0.100 E=5.000
P=2147483647.000
~A
----- Original Message -----
From: "Scott Ullrich" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, October 02, 2006 9:12 PM
Subject: Re: [pfSense Support] msntp
On 10/2/06, Roberto Greiner <[EMAIL PROTECTED]> wrote:
hi,
I've just installed rc3, and got a problem with ntp.
I've tried adding the ntp server both as a name and as an IP address,
but in the logs I keep getting the following message:
Oct 2 15:33:41 teste msntp[12662]: msntp options: a=2 p=0 v=1 e=0.100
E=5.000 P=2147483647.000
Oct 2 15:33:41 teste msntp[12662]: d=18000 c=5 x=18000 op=1
l=/var/run/msntp.pid f=/var/db/msntp.state A.B.C.D
Oct 2 15:33:41 teste msntp[12662]: msntp: bad daemon restart information
Oct 2 15:33:41 teste msntp[12662]: msntp: unable to locate IP
address/number
Oct 2 15:33:41 teste msntp[12662]: msntp: Unknown error: 0
Putting a name gets the same message, just with the machine name instead
of the A.B.C.D address. I'v also tried a rule in the firewall opening
ntp udp port, using the ntp port both as source port and destination
port, but it didn't work. Does anyone know what's happening? The message
is beeing repeat every minute.
Thanks for the report. I'll look into it. At this point I am
strongly leaning toward dumping MSNTP and replacing it with a sane
program.
Scott
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
--------((((((( Internet Email Confidentiality Footer )))))))--------
This e-mail, including any attachments, may contain information that is
protected by law as privileged and confidential, and is transmitted for
the sole use of the intended recipient. If you are not the intended
recipient, you are hereby notified that any use, dissemination, copying
or retention of this e-mail or the information contained herein is
strictly prohibited. If you have received this e-mail in error, please
notify immediately the sender by telephone or reply by e-mail, and
permanently delete this e-mail from your computer system.
The statements and opinions expressed in this e-mail message are
those of the author of the message and do not necessarily represent
those of List Group S.p.A. Besides, the contents of this message
shall be understood as neither given nor endorsed by List Group S.p.A.
List Group S.p.A. does not accept liability for corruption, interception or
amendment, if any, or the consequences thereof.
-----------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
