Scott Ullrich wrote: > Please try and upload this fix: > http://www.pfsense.com/~sullrich/pfSense-1.0-RC3d-Full-Embedded.tgz to > System -> Firmware. I installed the update, but now I'm getting the following error:
Fatal error: Call to undefined function: bcmod() in /usr/local/captiveportal/radius_accounting.inc on line 305 I'm getting it both at the Services/Captive Portal screen and when trying to disconnect users at Status/Captive Portal > > In terms of the reboot and halt issues, this is generally ACPI > related, make sure your BIOS is up to date and check out > http://wiki.pfsense.com/wikka.php?wakka=BootOptions and > http://wiki.pfsense.com/wikka.php?wakka=BootTroubleShooting > > Scott > I will try it next. Tks Roberto > > > On 10/5/06, Roberto Greiner <[EMAIL PROTECTED]> wrote: >> Hi, >> >> I'm getting a script error on the captive portal page. I'm making a test >> run with 1.0rc3, and in my test I added a 10 minutes "idle timeout" >> limit and a 30 minutes "Hard Timeout" (the small values are for the test >> run only!). When I pressed the save button, I got a blank page with the >> following line: >> >> Fatal error: Call to undefined function: getvolume() in >> /usr/local/captiveportal/radius_accounting.inc on line 164 >> >> Captive portal has the following other settings: >> * >> *Enable logaout popup window is enabled >> Radius Authentication (only primary server) >> send Radius Accounting packets >> Enable HTTPS login >> HTTPS server name is filled, certificate and key windows have the proper >> keys. >> A portal page is set >> >> All the rest is empty or not set. >> >> The machine is a 2.4 Xeon, with a 74GB Sata disk e 1GB RAM. >> >> Also, the "Halt" and "Reboot" options in the Diagnostics menus don't >> seem to be working. With the reboot command, I got the usual message >> "The system is rebooting now. This may take a minute." But after 5 >> minutes the system had not initiated the reboot and all the services >> where still operating normally. No reboot was done. With the "Halt" >> option, I got again the following message: >> >> Fatal error: Call to undefined function: getvolume() in >> /usr/local/captiveportal/radius_accounting.inc on line 164 >> >> When I tried to reboot the machine with a "/sbin/reboot" from the >> Diagnostics/Command screen, the webinterface and the server keyboard >> ceased to answer. I tried the Power button, and to my surprise the >> machine started a normal shutdown. So I couldn't verify if all functions >> where still working properly. >> >> To be sure, I tried to reboot again 5 minutes later, and the same thing >> happened. The halt command gave me the error message from above again. >> This time I tried /sbin/halt instead of reboot, but the same thing >> happened: The web interface stopped working, the machine keyboard too, >> and pressing the power button made the machine start a shutdown. >> >> Besides that, another service that is giving me the same "Call to >> undefined function" error message as above is trying to disconnect a >> user through the Status/Captive Portal screen. I get the message and the >> user is not disconnected. >> >> Roberto -- ------------------------------------------------------------------- | Marcos Roberto Greiner | | | | Os otimistas acham que estamos no melhor dos mundos | | Os pessimistas tem medo de que isto seja verdade | | Murphy | ------------------------------------------------------------------- | [EMAIL PROTECTED] | ------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
