Yes, I did try the Dell diagnostics and it did not show any errors, only one warning that I had a "wrong" keyboard layout.
When booting pfSense, just above the line with the Fatal trap 19 on it, there is a line with: "Ram parity error likely hardware failure.", but I did try the Dell diagnostics several times and Dell says the Ram is ok. I'll try the snapshot Holger suggested now and report back. Christian > -----Original Message----- > From: Vivek Khera [mailto:[EMAIL PROTECTED] > Sent: Montag, 4. Dezember 2006 17:38 > To: [email protected] > Subject: Re: [pfSense Support] Installation problem on DELL > PowerEdge SC440 > > > On Dec 4, 2006, at 8:48 AM, Christian Krützfeldt wrote: > > > First part of the boot is fine, then the option is displayed 0 > > Default, 1 ... And shortly after that. It happens: > > > > Fatal trap 19: non-maskable interrupt while in kernel mode > > > > Have you run Dell diagnostics on it? I run pfSense on an > SC400, and also have FreeBSD running on an SC430 and about > two dozen other Dell boxes with no problems. > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
