Hi Sai, Thanks for your message, i had successfully installed the PFSENSE with lastest snap, thank you.
By the way, do you come cross a solution with two layer of port mapping via two firewall, let me brief you my network infracstructure, so that, you can understand my question, currently, i have one netscreen firewall as a front end box to control all the in/out bound of all the traffic even port mapping to internal server by using pulic IP. the reason of putting a new box in front of netscreen is to provide load balancer and fail over function with two WAN lines, however, initially, I am having some difficulty of implementing the PFSENSE is due to the IP addressing restructure, in order to get it done, i have to step ahead by changing the outbound netscreen's interface to Private IP, until this stage, PFSENSE becomes the main control of inbound port mapping, with this new design, do u think that is the inbound traffic can be routed via two layer of firewall by port mapping method to DMZ and LAN internal server, please advice, Sorry for the confusion and long story. please let me know if you need more detail about this, thanks. From: CE Ang --- sai <[EMAIL PROTECTED]> wrote: > the latest snapshots would be here: > http://snapshots.pfsense.com/FreeBSD6/RELENG_1/ > which have improved > the load balancing user interface. > > On 1/26/07, sai <[EMAIL PROTECTED]> wrote: > > the download mirrors are here: > > http://pfsense.com/mirror.php?section=downloads > > > > a copy of the Live iso is here: > > > http://pfsense.basis06.com/download//downloads/pfSense-1.0.1-LiveCD-Installer.iso.gz > > > > md5 of the iso.gz : > > > http://pfsense.basis06.com/download//downloads/pfSense-1.0.1-LiveCD-Installer.iso.gz.md5 > > > > I hope that this is what you were asking for > > > > sai > > > > On 1/26/07, AngChorEng <[EMAIL PROTECTED]> > wrote: > > > Hi Scott, > > > > > > Thanks for your information, sorry for the same > question, do you have any > > > source of address in LIVECD.iso download for my > PFSENSE installation, by > > > using livecd, it is much straight forward and > able to run it in trial mode > > > before installing it to hard-disk. please > advice. > > > > > > Thank you. > > > > > > > > > --- Scott Ullrich <[EMAIL PROTECTED]> wrote: > > > > > > > On 1/24/07, AngChorEng <[EMAIL PROTECTED]> > > > > wrote: > > > > > > > > > > > > > > > Hi Scott, > > > > > > > > > > Thanks for your information, i will get the > new > > > > ISO and reinstall my > > > > > pfsense, do u think that can i use this ISO > file > > > > as booting from CD and > > > > > reinstall the pfsense, in additional to > this, > > > > would you mind to provide the > > > > > instruction guide line for the load balancer > and > > > > fail-over configuration. > > > > > > > > Follow the instructions for booting and > installing > > > > at > > > > > http://doc.pfsense.org/index.php/Installing_pfSense > > > > > > > > You can find load balancing howto at > > > > > http://wiki.pfsense.com/wikka.php?wakka=pfSenseHome > > > > > > > > Scott > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: > > > > [EMAIL PROTECTED] > > > > For additional commands, e-mail: > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: > [EMAIL PROTECTED] > For additional commands, e-mail: > [EMAIL PROTECTED] > > >
